Beneficiation Plant

Gold Flotation Production Line

Gold mining equipment is mainly used for separating gold ore in mineral processing industry, and the methods of processing gold ore are flotation, magnetic separation and re-election. Gold mining equipment mainly includes jaw crusher, ball mill, classifier, flotation machine, dryer, gold shaking table, spiral concentrator and so on.

SHARE THIS:

    Process Introduction

    Rising gold prices in recent years have further stimulated rapid development in the gold industry. With the reduction of high-grade gold reserves, gold ore gold beneficiation process has gradually become the mainstream trend of global gold beneficiation. The gold content in gold ore is very low, so the gold beneficiation process must crush, grind, and sort the ore. The mining industry more widely applies gravity separation and flotation for gold beneficiation. Gravity separation plays a very important role in alluvial gold production. Gold Flotation Production Line is a widely used beneficiation method in rock and gold ores.

    Workflow Introduction

    1:Crushing
    The loader feeds the raw ore into the vibrating feeder, and the vibrating feeder feeds the material evenly into the jaw crusher for the preliminary crushing process. If required, a cone crusher or hammer crusher can perform secondary crushing to produce properly sized particles.
    Required equipment; vibrating feeder, jaw crusher, cone crusher or hammer crusher

    2:Grinding
    The crushed material passes through the vibrating screen into the ball mill, through the mill for fine treatment
    Required equipment: ball mill, spiral classifier

    3:Separation
    Gold Ore Gravity Separation: The gravity separation process is to rely on the medium fluid and a variety of mechanical force of the combined effect, through the creation of suitable loose layer and separation conditions, to obtain different density and size of the particles. The method is only applicable to single dissociated gold ore.
    Gold Ore Flotation: The flotation machine receives the slurry, mixes it with added chemicals, and agitates the mixture to extract the valuable ore powder. In the flotation process, the slurry is aerated through agitation. This causes target mineral particles to attach selectively to the rising air bubbles. The mineral-laden bubbles form a froth on the slurry surface, which is then skimmed off as concentrate. The beneficiation process then discharges the remaining slurry, which contains the unwanted material, as tailings. This achieves the mineral separation.
    Required equipment: flotation machine, magnetic separator, shaking table

    4: Drying
    the obtained gold powder is fed into the desiccant for drying to get the required material.

    The selection and combination of equipment are critical in the gold beneficiation process. These decisions depend on several factors, including the nature of the gold ore, the specific beneficiation process, and the production scale. In practical applications, engineers select and configure equipment based on specific conditions to optimize beneficiation efficiency and economic returns.

    Process advantage

    • High-efficiency recovery of ultrafine gold particles:
      Effectively captures ultrafine and finely disseminated gold particles difficult to recover via gravity separation, significantly enhancing recovery rates.
    • High enrichment ratio, cost-effective:
      Flotation concentrates low-grade ore into high-grade concentrate, substantially removing gangue to drastically reduce energy consumption and costs in subsequent transportation and smelting.
    • Comprehensive Recovery of Valuable Metals:
      For complex polymetallic gold ores, flotation enables the integrated recovery of gold alongside valuable metals such as copper, lead, and zinc through reagent control, thereby enhancing resource utilisation.
    • Mature and Stable Process Flow:
      Flotation technology is well-established and readily amenable to automated control, facilitating stable production metrics, optimised reagent regimes, and reduced operational intensity.

    Service Support

    We are a professional machinery manufacturer that produces and sells our own products.

    You can bring materials to the factory to test the machine

    We will customize the solution according to your needs

    60

    60S Quick response

    30

    Minutes Technical reply

    24

    Hours design proposal

    whatsApp